Home »
Extenders »
KVM Extenders »
4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet

4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet

NTI Part #: ST-C6USB4K18GB-HDBT-Group

XTENDEX® ST-C6USB4K18GB-HDBT (Local and Remote Units)

Additional Images/Videos

NTI Part #: ST-C6USB4K18GB-HDBT-Group

The XTENDEX® 4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 transmits uncompressed digital Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI signal, USB, IR, RS232, and power up to 328 feet over a single CATx cable using HDBase-T technology. Each extender consists of a local unit that connects to a computer and provides local keyboard, monitor and mouse connections; and a remote unit that connects to a keyboard, monitor and mouse.

Extend Ultra-HD 4Kx2K to 328 feet & 1080p to 492 feet
18Gbps bandwidth
HDMI 2.0
Only one power supply required
Local and remote KVM access

ROHS Compliant 4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet
4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 FeetDigital Signage Product
CE Compliant 4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet
FCC Compliant 4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet

Scroll Down to Get Quote

Overview

Transmits an uncompressed high speed HDMI signal over one CAT6/6a/7 cable.
Supports resolutions up to Ultra-HD 4Kx2K (3840x2160 and 4096x2160 @24/30/60Hz YUV 4:4:4).
- Extend a 4Kx2K signal up to 328 feet (100 meters) with solid CAT6/6a/7 cable.
- Extend a 1080p signal up to 492 feet (150 meters) with solid CAT6/6a/7 cable.
HDMI features supported:
- HDMI 2.0
- Up to 36-bit Deep Color
- RGB, YUV 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
- Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, Dolby Digital 2/5.1CH, LPCM 2/5.1/7.1CH, LPCM 2CH, LPCM 5.1, DTS 5.1, DTS:X, and DTS 2/5.1CH.
- Bandwidth up to 600 MHz (18 Gbps)
- Support for CEC (consumer electronic control) compatible devices.
- HDR10
HDCP 2.2 and 1.4 compliant.
Local unit provides local KVM access.
Bi-directional Infrared Remote (IR) control of HDMI source or display. IR transport channel can be forward or backward per the installation.
Supports full-duplex RS232 up to 115200 baud.
USB 2.0 ports for keyboard, mouse, flash drive, web camera, or touchscreen display.
- Compliant with USB 2.0 (low/full/high speed) standards.
- Use a USB hub to extend multiple USB devices.
Only one power supply is necessary to power both the local and remote units.
Use the DIP switch on the receiver to extract the digital HDMI audio signal and convert it to 2-channel analog stereo audio or multi-channel SPDIF digital audio.

Specifications

Local Unit

Host Connection
- Compatible with a USB computer or HDTV video source with HDMI output.
- Multiplatform support: Windows 2000/XP/Vista/7/8/10, Windows Server 2000/2003/2008/2012/2016, Solaris, Linux, FreeBSD, and MAC OS 9/10.
- One female HDMI connector.
- One female USB Type B connector.
- 3-pin screw terminal for RS232.
  - Support full-duplex RS232 up to 115200 baud.
- Two female 3.5mm ports for connecting an IR emitter and receiver (included).
- One female RJ45 port for sending/receiving UHD video, USB, audio, RS232, IR, and power signals.
- One female Micro USB Type B for updating firmware.
- Supports HDCP 2.2/1.4.
- DIP switch to select 4Kx2K or 1080p resolution transmission to remote display.
- Dip switch to copy EDID from local or remote displays.
Local Access
- Supports resolutions up to Ultra-HD 4Kx2K (3840x2160 and 4096x2160 @24/30/60Hz YUV 4:4:4).
- One female HDMI connector.
- Two female USB Type A connectors.

Remote Unit

Supports resolutions up to Ultra-HD 4Kx2K (3840x2160 and 4096x2160 @24/30/60Hz YUV 4:4:4).
One female HDMI connector for display.
Two female USB Type A connectors for connecting USB keyboard, mouse, flash drive, web camera, or touchscreen display.
- Compliant with USB 2.0 (low/full/high speed) standards.
- Use a USB hub to extend multiple USB devices.
One female Micro USB Type B for updating firmware.
3-pin screw terminal for RS232.
- Support full-duplex RS232 up to 115200 baud.
One female 3.5mm port for stereo audio.
Two female 3.5mm ports for connecting an IR emitter and receiver (included).
One RCA jack for SPDIF digital audio.
One female RJ45 port for sending/receiving UHD video, USB, audio, RS232, IR, and power signals.
DIP switch to select 4Kx2K or 1080p resolution transmission from the source.
DIP switch to extract the digital HDMI audio signal and convert it to 2-channel analog stereo audio or multi-channel SPDIF digital audio.
Supports HDCP 2.2/1.4.
Max data rate: 18Gbps

Dimensions

WxDxH (in): 6.79x4.46x0.94 (172x113x24 mm)

Power

Powered from a single power supply attached to either the local or remote unit.
Local or remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
Output: 24VDC, 1A
Power consumption: 14W (max)

Environmental

Operating temperature: 23 to 104°F (-5 to 40°C).
Operating/storage relative humidity: 5 to 90% non-condensing RH.

Regulatory Approvals

CE, FCC, RoHS

Warranty

Two years

Max Distance

Extend a 4Kx2K signal up to 328 feet (100 meters) with solid CAT6/6a/7 cable.
Extend a 1080p signal up to 492 feet (150 meters) with solid CAT6/6a/7 cable.

Cables

Interface cables between the source/display and the transmitter/receiver are required for proper operation.
- Supports cable lengths to 20 feet for 4Kx2K resolutions and 50 feet for 1080p.
- Longer cables can be used provided they have a built-in video equalizer (also known as "active HDMI cables").
Use HD-xx-MM cable to connect an HDMI source or display (not included).
Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet.
- HD-ACT-20/25/30/40/50/60-MM supports resolutions to 4K@60Hz (18 Gbps).
- HD-ACT-75/100-MM supports resolutions to 4K@30Hz (10.2 Gbps).
Use DVI-HD-xx-MM cable to connect a DVI source or display (not included).
- Does not support 4Kx2K resolutions.
Use CAT6/6a/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
- Extend a 4Kx2K signal up to 328 feet (100 meters) with solid CAT6/6a/7 cable.
- Extend a 1080p signal up to 492 feet (150 meters) with solid CAT6/6a/7 cable.
Male USB Type A to male USB Type B interface cable included.

Application Drawings

4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet

How to extend Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, audio, USB keyboard/mouse, RS232, IR, and power up to 328 feet (100 meters) away from the source using HDBase-T technology

Downloads

Data Sheet:

4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet 289 KB

(0)HDMI USB KVM Extender over HDBase-T

NTI Part #	Description	Qty
ST-C6USB4K18GB-HDBT	4K 18Gbps HDMI USB KVM Extender over HDBase-T with RS232 to 328 Feet

Collapse all Expand all Related Items :

(0)HDMI Male-Male Cables

NTI Part #	Length	Qty
HD-3-MM	3 feet
HD-6-MM	6 feet
HD-10-MM	10 feet
HD-15-MM	15 feet
HD-25-MM	25 feet
HD-30-MM	30 feet
HD-50-MM	50 feet

(0)4K HDMI Active Cable, Male to Male, Built-In Signal Booster

NTI Part #	Length	Qty
HD-ACT-20-MM	20 feet
HD-ACT-25-MM	25 feet
HD-ACT-30-MM	30 feet
HD-ACT-40-MM	40 feet
HD-ACT-50-MM	50 feet
HD-ACT-60-MM	60 feet
HD-ACT-75-MM	75 feet
HD-ACT-100-MM	100 feet

(0)DVI-D Male to HDMI-A Male Single Link Cable

NTI Part #	Length	Qty
DVI-HD-1M-MM	1 meter
DVI-HD-2M-MM	2 meters
DVI-HD-3M-MM	3 meters
DVI-HD-5M-MM	5 meters

Top Please enter a quantity of at least one product